2023 Dufour 412

• Hull: Hand-laminated in polyester/glassfibre.
• Decoration: Decorative stripes on the hull.
• Gelcoat: NPG gelcoat with first mat impregnated with NPG resin forming an optimum barrier against osmosis.
• Structure: Hull bottom counter-moulded, floors laminated into the hull.
• Deck: Sandwich with injected foam core
• Ballast: Keel bolts bear on stainless back-plates
• Rudder: Semi-elliptical shape, filled with closed-cell epoxy foam.
• Rudder stock: Solid stainless steel.
• Non-slip deck surface: Non-slip structured deck surface

• Hand rails: Wood on cabin roof.
• Fixed toe rails: 2, wooden
• Anchor locker: Self-draining with built-in windlass support and anchor chain eyebolt, lockable hatch cover.
• Bow pulpits: Seat and separate green/red navigation lights
• Stern pulpits: Lifebuoy bracket, jackstaff bracket, navigation light, and opening life-lines with hook.
• Stanchions: 8 with 2 rows of life-lines.
• Other: Solid wooden toe-rail.
• Shroud chainplates: Single chainplate for cap shrouds and lower shrouds.
• Safety chainplates: Safety harness chainplates in cockpit floor
• Chainplates: 2 backstay chainplates
• Midships mooring cleats: 2, aluminium
• Mooring cleats: 4, aluminium.
• Rubbing strips: 6 stainless, on hull sheerline
• Fuel deck fillers: 1
• Water deck fillers: 2
• Mainsheet tracks: On coachroof with adjusting car.
• Genoa tracks: With car.
• Downhaul: With 6-fold purchase tackle.
• Pulleys: 2 single genoa sheet return pulleys on coaming
• Through-deck fitting: Stainless swan-neck for electrical and electronic cables.
• Deck organizers: 2 deck organizers, 4- and 3-sheave for halyard, sheet, and reef line returns.
• Halyard winches: 1 halyard winch on coachroof.
• Sheet winches: 2 genoa sheet winches on cockpit coamings
• Jamcleats: 2 rows of jamcleats port / starboard level with the companionway
• Furler line jamcleats: 1 at aft end of sidedeck

• Cockpit bench seats: Slatted teak
• Lockers: 2 large side lockers, lids fitted with gas struts and fixings for padlocks.
• Helm: Wheel
• Helm console: Polyester.
• Engine control: At starboard helm position
• Compasses: 2 on columns
• Gas locker: In starboard aft locker
• Stern door: Swings up, with built-in telescopic stainless bathing ladder
• BIB locker: Life raft stowage in dedicated locker.
• Shower: In port stern locker
• Supply: Connector in port stern locker
• Bathing ladder: Telescopic stainless bathing ladder
• Cockpit floor: Non-slip polyester cockpit floor.
• Emergency tiller: Head of rudder stock beneath helmsman’s floor for fitting the emergency tiller

Fore Cabin

• Berth: 200 × 140 cm approx.
• Mattress: 10 cm thick foam mattress with washable cover.
• Storage:
  - Below berth.
  - Cubby-hole along side of hull.
  - Hanging locker with shelves
  - Below berth.
  - Shoe locker in podium
• Water tank: Below berth
• Access: To navigation instrument transducers

Forward Head

• WC: Manual sea toilet.
• Wash-basin: Wash-basin unit with basin in Corian®C synthetic resin.
• Water: Hot and cold water with chrome-plated brass single-lever mixer tap.
• Drain: Direct, via an electric pump.
• Mirror: Yes
• Grating: ‘Corian®’ synthetic resin (std) or teak (option)
• Ventilation: Via deck panel or opening port.
• Cupboards: Storage unit.

Aft Head

• WC: Manual sea toilet.
• Wash-basin: Wash-basin unit with basin in ACorian®C synthetic resin.
• Water: Hot and cold water, chrome-plated brass single-lever mixer tap and shower head.
• Drain: Direct, via an electric pump.
• Cupboards: 1 high-level 1-door storage unit with mirror
• Mirror: Large mirror
• Shower grating: ‘Corian®’ synthetic resin (std) or teak (option)
• Ventilation: Via deck panel or opening port.

Saloon

• Saloon banquette: U-shaped banquette on port side.
• Central banquette: Fixed central banquette
• Table: With fiddles, removable cover with pad for hot dishes.
• Storage:
  - Below banquette. Storage under seats and behind backrests.
  - Behind port banquette back. Bookshelf above banquette
  - 3 cubby-holes with doors.
  - Removable fiddles
• Mast foot: Stainless

Aft Cabin

• Berth: 200 × 160 cm approx.
• Mattress: 10 cm thick foam mattress with washable cover.
• Fuel tank: Beneath berth, starboard side.
• Water tank: Beneath berth, port side.
• Storage:
  - Hanging locker with double door with shelf.
  - Cubby-hole along hull liner with fiddle.
• Soundproofing:Double bulkhead provides acoustic and thermal insulation from adjoining engine compartment.
• Technical area:Between aft berths, with stowage.

• Configurations: Longitudinal.
• Worktop: ‘Corian®’ synthetic resin with wooden fiddle.
• Sink: Stainless, twin bowls with Corian®C synthetic resin cover
• Water: Hot and cold pumped water with chrome-plated brass single-lever mixer tap.
• Gas cooker: 2-burner cooker with oven on gimbals, with removable wooden cover and stainless rail
• Crockery storage: Dowels to retain crockery when heeling.
• Refrigerator access: Via the frontage and the worktop.
• Storage:
  - 3 cubby-hole with closed compartments with formed wood flap
  - 3-door under-sink unit with cutlery drawer, 2 plastic bins, waste bin
  - Storage for bottles with locking
• Waste bin: Sort compartments
• Storage under gas cooker

• Mast: Anodized aluminium with 2 levels of swept spreaders
• Rigging: 9/10 fractional
• Mast stepping: On deck
• Lights: Anchor and masthead lights.
• Topping lift: Boom topping lift cleats.
• Boom: Anodized aluminium fitted with 2 continuous reefers.
• Furler: Genoa roller furler.
• Standing rigging: Continuous in stainless single-strand cable, chrome-plated bronze rigging screws, comprising: forestay, twin backstay, inter. and lower shrouds.
• Backstay: double
• Running rigging: Running rigging in pre-stretched textile including: main and genoa halyards, boom topping lift, main and genoa sheets, 2 continuous reef lines, leech tensioner, 2 mainsheet car adjustments,furling line, downhaul tackle.
• Mainsail: 2 wide reef strips, with battens and bag.
• Dacron Genoa: Furling genoa with UV-protection.