2023 Dufour 32

• Hull: Hand-laminated polyester/glassfibre
• Decoration: Decorative stripes on the hull
• Gelcoat: NPG Gelcoat with first of cloth impregnatet with NPG resin
  forming an optimum barrier against osmosis.
• Structure: Inner moulded hull bottom, structural framing laminated
  to the hull.
• Deck: Sandwich construction with injected PVC foam core
• Ballast: Keel bolts bear on stainless steel back-plates
• Rudder: 2 Semi-elliptical shape, filled with closed cell epoxy foam
• Rudder stock: Solid stainless steel
• Non-slip deck surface: Diamond point non skid profile on deck

• Hand rails: Wood on cabin roof
• Fixed toe rails: Around hull to deck joint
• Anchor locker: Self-draining with built-in windlass support and anchor chain eye bolt, lockable hatch cover
• Bow pulpits: Open
• Stern pulpit: Lifebuoy bracket and opening life-lines with hook
• Stanchions: With 2 rows of life-lines
• Shroud chainplates: Outboard deck side shroud chainplates
• Miscellaneous chainplates: No backstay
• Mooring cleats: 4 aluminum
• Mooring line protection: 4 stainless steel plates, on hull sheerline
• Fuel deck fillers: 1
• Water deck fillers: 1
• Mainsheet: Mainsheet on cockpit bottom
• Genoa track: Self tacking genoa track recessed on coachroof 
• Vang: With quadruple-purchase tackle and cascade
• Through-deck fitting: Stainless steel swan-neck tube for electrical and electronic cables
• Deck organizers: 5-sheave deck organizer for halyard, sheet, and reef line returns
• Halyard winches: 1 Lewmar size 30 halyard winch on coachroof, to trim self tacking jib, mainsail sheet and halyard
• Cleats: Jamcleats port side of the companionway
• Furler line jamcleats: 1 at aft end of sidedeck
• Hatch covers: Polyester cover forward of companionway

• Cockpit bench seats: Antiskid covered
• Helmsman’s side seat: Antiskid covered
• Lockers: 1 large side locker to stbd with lid with fixing for padlock
• Helm: Twin steering wheels leather covered
• Engine control: Engine throttle lever and control panel on cockpit
  side
• Compasses: 1 compass
• Instrumentation: On aft end of cockpit coaming (OPT to be picked)
• Gas locker: Sealed locker aft, to port
• Liferaft locker: Locker in cockpit floor, aft
• Shore supply: In stbd helmsman’s seat locker
• Cockpit floor: Non-slip polyester cockpit floor
• Emergency tiller: Head of rudder stock beneath helmsman’s floor for fitting the emergency tiller

Forward Cabin

• Berth: 200 cm approx
• Mattress: 10 cm thick foam mattress with washable cover
• Stowage: Below berth, 2 hanging lockers with shelf
• Water tank: Below berth (160L as option)

Aft Head

• WC: Manual sea toilet
• Wash-basin: Basin unit with one-piece moulded top
• Water: chrome-plated brass single-lever mixer tap and shower head
• Drain: Direct, via an electric pump (pack)
• Mirror: Large mirror
• Ventilation: Via deck hatch
• Other: Oil skin space

Saloon

• Saloon seats: Large seats on both sides
• Table: Saloon table with 2 folding leaves
• Stowage:
• Under seats and behind backrests
• Built in to saloon table
• 2 top lockers each side
• Mast pillar: Stainless steel
• Access: To navigation instrument transducers

• Configurations: L-shaped port side
• Worktop: ‘Corian®’ synthetic resin with integrated fiddle
• Sink: Stainless sink with covers in ‘Corian®’
• Water: chrome-plated brass single-lever mixer tap
• Gas cooker: 2-burner gas cooker (oven in the pack) on gimbals, with stainless rail
• Refrigerator: refrigerator box with sliding storage bins (12 V electric compressor in the pack)
• Refrigerator access: Via the worktop
• Stowage
• 2 closed lockers
• 1 sheld above cooker
• Below sink
• Under burner
• Waste bin: Below sink
• Other: Light and ventilation ensured by opening port-lights above galley

• Mast: Anodized aluminium with 1 levels of sweptback spreaders
• Rigging: 9/10 fractional
• Mast stepping: On deck
• Lights: 3-colour masthead light + anchor light
• Topping lift: Boom topping lift cleat
• Boom: Anodized aluminium fitted with 2 continuous reefers
• Furler: Genoa roller furler
• Standing rigging: Continuous in stainless single-strand cable, chrome-plated bronze rigging screws, comprising: forestay, inter and lower shrouds
• Backstay: No backstay
• Running rigging: Running rigging in pre-stretched textile including: main and genoa halyards, boom topping lift, main and genoa sheets, 2 continuous reef lines, furling line, vang and outhaul